This is a  (52cm) tall Table lamp base with a satin gunmetal gun metal finish, It is quite heavy and solid so it is ideal for most lamp shades with a 1/2" (13mm) centre hole that will fit on the finnial. The base can support any shade from 14"(35cm) upto 18" (45cm) shades without looking out of place. The switch is an inline toggle that is housed within the cable and it has a standard three pin UK 3 amp plug. All of our items are CE marked and for use in the UK and Europe. 

These are shipped from our Letchworth warehouse and are normally delivered to mainland UK on the next working day.

These are a good quality product and will fit most shades with a 1/2" (13mm) centre hole, if your shade has a bigger hole it may be worth contacting us for adaptive fittings.

This is a  (56cm) tall Table lamp base with a dark antique bronze finish, It is quite heavy and solid so it is ideal for most lamp shades with a 1/2" (13mm) centre hole that will fit on the finnial. The base can support any shade from 14"(35cm) upto 20" (51cm) shades without looking out of place. This has a standard three pin UK 3 amp plug. All of our items are CE marked and for use in the UK and Europe. 

These are shipped from our Letchworth warehouse and are normally delivered to mainland UK on the next working day.

These are a good quality product and will fit most shades with a 1/2" (13mm) centre hole, if your shade has a bigger hole it may be worth contacting us for adaptive fittings.

This has two E14 bulb holders operated by an in line switch  

This is a 27cm tall x 13cm wide Table lamp base with an antique satin finish, It is quite heavy and solid so it is ideal for most lamp shades with a centre hole between 10mm to 15mm will fit on the harp. The base can support any shade up to 8"(20cm) without looking out of place. The switch is an inline toggle that is housed within the cable and it has a standard three pin UK 3 amp plug. All of our items are CE marked and for use in the UK and Europe. 

These are shipped from our Letchworth warehouse and are normally delivered to mainland UK on the next working day.

These are a good quality product and will fit most shades with a 10mm to 15mm centre hole, if your shade has a bigger hole it may be worth contacting us for adaptive fittings.

Requires 1 x E14 Bulb 

This is a 28cm (top to bottom) Ceiling Light Up Lighter Fitting with a satin gunmetal finish, It is universal fitting so it is ideal for most lamp shades with a 1/2" (13mm) centre hole that will fit on the finnial. The fitting can support any shade from 12"(30cm) upto 20" (51cm) shades without looking out of place but does depend on depth of shade (Max 25cm). This does require to be fitted by a competent person as this replaces your existing light fitting or it is suitable for new sites.

All of our items are CE marked and for use in the UK and Europe. 

These are shipped from our Letchworth warehouse and are normally delivered to mainland UK on the next working day.

These are a good quality product and will fit most shades with a 1/2" (13mm) centre hole, if your shade has a bigger hole it may be worth contacting us for adaptive fittings.

It has two SES screw type bulb holders that accept E14 type bulbs, it is supplied with standard fittings (1 x hook fixing plate, 2 screws, 2 x screw plugs) 

This is a 41cm tall x 13cm wide Table lamp base with an antique satin finish, It is quite heavy and solid so it is ideal for most lamp shades with a 1/2" (13mm) centre hole that will fit on the harp. The base can support any shade from 8"(20cm) upto 12" (30cm) shades without looking out of place. The switch is an inline toggle that is housed within the cable and it has a standard three pin UK 3 amp plug. All of our items are CE marked and for use in the UK and Europe. 

These are shipped from our Letchworth warehouse and are normally delivered to mainland UK on the next working day.

These are a good quality product and will fit most shades with a 1/2" (13mm) centre hole, if your shade has a bigger hole it may be worth contacting us for adaptive fittings.

This is a 37cm tall Table lamp base it is solid moulded from a zinc alloy polycarbonate so it is heavy giving stability.  It has a good quality bronzed metallic satin finish with a 1.6 metre cable with an inline toggle switch.

The lamp hold accepts E14 bulbs up to a max 40W incandescant or 7W E14 Low energy bulb.

The base comes complete with the harp and finial as shown in the pictures.

The dimensions are 37cm tall, the base is 12cm at the widest point and the harp is 9.5cm at the widest point, the fitting on the top has a 9mm thread so will accept shades with a 10mm to 12mm hole. 

Bulbs are not included with the base, bulb required is E14 fitting (Small Edison Screw) 

All of our items are CE marked safe to use in the UK and Europe 

These are shipped from our Letchworth warehouse and are normally delivered to mainland UK on the next working day.

This is a replacement Harp and Finial for small table lamps whether you are replacing an old one or making you own base.

Dimensions are 18cm top to bottom x 10cm at the widest point, the hole in the mount is 10mm but can be made larger to suit and the shade mount finial has a 9mm thread accepting shades with a 10mm to 12mm hole.

Recommended lampshade size is 150mm  to 250mm but this is obviously personal preference and can be customised to suit 

These are shipped from our Letchworth warehouse and are normally delivered to mainland UK on the next working day.

This is a 35cm tall Table lamp base it is solid moulded from a zinc alloy polycarbonate so it is heavy giving stability.  It has a good quality bronzed metallic satin finish with a 1.6 metre cable with an inline toggle switch.

The lamp hold accepts E14 bulbs up to a max 40W incandescant or 7W E14 Low energy bulb.

The base comes complete with the harp and finial as shown in the pictures.

The dimensions are 35cm tall, the base is 12cm at the widest point and the harp is 9.5cm at the widest point, the fitting on the top has a 9mm thread so will accept shades with a 10mm to 12mm hole. 

Bulbs are not included with the base, bulb required is E14 fitting (Small Edison Screw) 

All of our items are CE marked safe to use in the UK and Europe 

These are shipped from our Letchworth warehouse and are normally delivered to mainland UK on the next working day.

This is a 22cm tall  Table lamp base with an antique satin finish, It is quite heavy and solid so it is ideal for most lamp shades with a 1/2" (13mm) centre hole that will fit on the harp. The base can support any shade from 8"(20cm) upto 12" (30cm) shades without looking out of place. The switch is an inline toggle that is housed within the cable and it has a standard three pin UK 3 amp plug. All of our items are CE marked and for use in the UK and Europe. 

These are shipped from our Letchworth warehouse and are normally delivered to mainland UK on the next working day.

These are a good quality product and will fit most shades with a 1/2" (13mm) centre hole, if your shade has a bigger hole it may be worth contacting us for adaptive fittings.